|
Post by MultiFast Is MultiFun on Mar 12, 2004 21:34:31 GMT -5
Courtesy and acknowledgements to Gougeon Brothers, Bay City, Michigan for the following information. The ratios noted are for mixing a 5:1 ratio (resin vs. hardener) of W.E.S.T. Systemtm epoxy. Once printed, you can use the enlarge/reduce feature on a photo copier to make a bigger mixed "puddle" or a smaller one. Just place under a piece of waxed paper, and press resin pump until the "puddle' fills the bigest circle. Then press the pump on the hardener until it fills the little circle. Mix well and apply. You can add fillers to thicken the mix if desired. REMEMBER - THIS IS FOR A 5:1 RATIO MIX !
|
|